1. |
Remove the cylinder head cover.
(Refer to Cylinder Head Assembly - "Cylinder Head Cover")
|
2. |
Set No.1 cylinder to TDC/compression.
|
3. |
Remove the service hole bolt(A) of the timing chain cover.
|
4. |
Release the ratchet of the timing chain tensioner by pulling the link
down using a thin rod.
|
5. |
Remove the high pressure fuel pump bracket(A).
|
6. |
Remove the camshaft.
|
7. |
Disconnect the intake CVVT assembly(A) and exhaust CVVT assembly(B)
from camshaft(C).
|
Instrument Cluster Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the cluster fascia panel (A).
(Refer to Body - "Crash pad")
...
Specifications
Direct control VFS[35R/C]
▷ Control type : Normal high type
Control Pressure kpa
(kgf/cm², psi)
539.370 ~ 0 ( 5.5 ~ 0, 78.23 ~ 0)
Current value(mA) ...
Teaching Procedures
1.
Key Teaching Procedure
Key teaching must be done after replacing a defective PCM(ECM)
or when providing additional keys to the vehicle owner.
The procedu ...