1. |
Disconnect the cruise control switch connector from the control
switch.
|
2. |
Measure resistance between terminals on the control switch when
each function switch is ON (switch is depressed).
|
3. |
If not within specification, replace switch.
|
1. |
Connect the cruise control switch connector to the control switch.
|
2. |
Measure voltage between terminals on the harness side connector
when each function switch is ON (switch is depressed).
|
3. |
If not within specification, replace switch.38
|
Curtain air bag
Curtain air bags are located along both sides of the roof rails above the front
and rear doors.
They are designed to help protect occupants in certain side impacts and to help
prevent them from e ...
Engine Mounting Removal and Installation
Roll road Bracket
1.
Remove the roll road bracket(A).
Tightening torque
Bolt (B) :
49.0 ~ 63.7 N.m (5.0 ~ 6.5 kgf.m, 36.2 ...
Instrument Cluster Installation
1.
Connect the cluster connector.
2.
Install the cluster assembly.
3.
Install the cluster facia panel.
...