1. |
Remove the drive belt.
(Refer to Timing System - "Drive Belt")
|
2. |
Remove the passenger engine room side cover.
(Refer to Engine And Transaxle Assembly - "Engine Room Under Cover")
|
3. |
Remove the passenger front tire.
|
4. |
Remove the crankshaft damper pulley(A).
|
5. |
Install in the reverse order of removal.
|
Starter Reassembly
1.
Reassemble in the reverse order of disassembly.
...
IPM Components
Outer Connector (L / M / N / K)
Connector
Pin No.
Description
Active
Remark
K
1
IMS LIN
...
Cylinder Block Inspection
1.
Remove gasket material.
Using a gasket scraper, remove all the gasket material from the top
surface of the cylinder block.
2.
Cl ...