1. |
Remove the cooling fan (A) after loosening the screws (B) from the cooling
assembly.
|
2. |
Remove the fan motor (B) after loosening the screws (A) from the cooling
fan shround.
|
3. |
Install in the reverse order of removal.
|
Rear Disc Brake Replacement
1.
Remove the rear wheel & tire.
2.
Loosen the guide rod bolt (B) and pivot the caliper (A) up out
of the way.
...
Drive Belt Removal and Installation
1.
For release the tension, turn the drive belt tensioner counterclockwise
then remove the drive belt (A).
2.
Install the drive be ...
Service Standard
Item
Specification
Ignition Timing (°)
BTDC 6 ± 10
Idle Speed (rpm)
A/C OFF
Neutral, N, P-range
680 ± 100
D-range
...