1. |
Check the condenser fins for clogging and damage. If clogged,
clean them with water, and blow them with compressed air. If bent, gently
bend them using a screwdriver or pliers.
|
2. |
Check the condenser connections for leakage, and repair or replace
it, if required.
|
Speakers Installation
Front speaker
1.
Install the speaker to the speaker mounting hole in the door in-panel.
2.
Reconnect the speaker connector.
Rea ...
Heater & A/C Control Unit (DATC) Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Using a screwdriver or remover, remove the center fascia panel
(A).
...
Oil Level Gauge & Pipe Removal and Installation
1.
Remove the oil gauge(A).
2.
Remove the intake manofold.
(Refer to Intake And Exhaust System - "Intake Manifold")
...