Kia Sorento: Components
| 2WD |
| 1. Rear upper arm 2. Rear stabilizer bar 3. Rear lower arm 4. Rear assist arm |
5. Rear shock absorber 6. Rear cross member 7. Trailing arm |
| 4WD |
| 1. Rear assist arm 2. Rear cross member 3. Rear drive shaft 4. Rear upper arm |
5. Rear coil spring 6. Rear stabilizer bar 7. Rear shock absorber 8. Rear lower arm |
Rear Shock Absorber Removel
2WD
1.
Remove the rear wheel and tire (A) from rear hub .
Tightening torque:
88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 ...
See also:
4WD ECU Description
4WD ECU processes signals from various sensors and determines the current
road and driving conditions. The ECU then utilizes this information to implement
precision control over the 4WD coupl ...
BJ Boot Components
1. BJ assembly
2. BJ circlip
3. BJ boot band
4. BJ boot
5. Dynamic damper band
6. Dynamic damper
7. Shaft
8. TJ boot band
9. TJ boot
10. Spider assembly
...
Windshield wipers
Operates as follows when the ignition switch is turned ON.
MIST/ :
For a single wiping cycle, move the lever to this (MIST/ ) position andrelease
it. The wipers will operate continuously if the l ...
Copyright В© www.ksmanual.com 2014-2024