• |
The display read "C".
|
• |
The compass headings become inaccurate.
|
• |
The compass heading is not changed.
|
• |
Some compass headings are not displayed.
|
• |
The compass headings are inaccurate in long distance driving.
|
1. |
Move the vehicle from the large steel structure or electric power
supply cable.
|
2. |
Turn on the compass by pressing the A button.
|
3. |
Check the zone number by pressing the A button for more than 4
seconds until the current zone number appears in the display.
To re-calibrate, hold the A button for 3 seconds until C is displayed.
If the zone number is different for your country, set the correct zone
number referring to "Setting the compass zone" and do the "calibration
procedure" again.
|
4. |
Drive your vehicle in at least 2 circles at less than 5 miles
per hour (8 km/h) until the compass heading appears. Driving in a circle
in right-handed direction and opposite direction is possible and if
possible, stops the wiper operation.
|
5. |
If the vehicle's compass headings become inaccurate as before,
do the following procedure again.
|
1. |
Find your current location and variance zone number on the zone
map.
|
2. |
Press the A button for more than 4 seconds. The current zone number
will appear in the display.
|
3. |
Release and press the A button until the new zone number appears
in the display. After you stop pressing the button in, the display will
show a compass direction within a few seconds.
|
|
Engine And Transmission Assembly Installation
Install the other parts in reverse order of removal.
Perform the following :
•
Adjust a shift cable.
•
Refill engine with engine oil.
...
Rear Seat Replacement
Rear Seat Assembly Replacement
[Second row seat assembly]
1.
Push the second row seat assembly [RH] (A) towards the front of
the vehicle as far as possibl ...
Overview
Description
The trip computer is a microcomputer- controlled driver information system that
displays information related to driving.
✽ NOTICE
Some driving information stored in the trip com ...