1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the cargo lamp lens (A) with a flat-tip screwdriver.
|
3. |
Remove the cargo lamp bulb (A).
|
4. |
Remove the cargo lamp assembly (A) after disconnecting the connector.
|
Front Body C
* These dimensions indicated in this figure are actual-measurement
dimensions. [ Unit : mm (inch) ]
...
Service Standard
Item
Specification
Ignition Timing (°)
BTDC 6 ± 10
Idle Speed (rpm)
A/C OFF
Neutral, N, P-range
680 ± 100
D-range
...
Dynamic Damper Removal
1.
Remove the front driveshaft.
(Refer to Driveshaft Assembly - “Front Driveshaft”)
2.
Remove the TJ joint assembly.
(Refe ...