1. |
Disconnect the brake fiuid level switch connector, and remove
the reservoir cap.
|
2. |
Remove the brake fluid from the master cylinder reservior with
a syringe.
|
3. |
Remove the wheel & tire.
|
4. |
Disconnect the brake tube by loosening the tube flare nut (B).
Front
Rear
|
5. |
Remove the brake hose clip (A).
|
6. |
Disconnect the brake hose from the brake caliper by loosening
the bolt (A).
Front
Rear
|
Front Door Replacement
Front Door Trim Replacement
•
When prying with a flat-tipped screwdriver, wrap it with
...
Shift Cable Removal
1.
Remove the floor console.
(Refer to Body - "Floor console")
2.
Remove the air duct.
3.
Dis ...
Temperature Control Actuator Description
The heater unit includes mode control actuator and temperature control
actuator.
The temperature control actuator is located at the heater unit. It regulates
the temperature by the proced ...