Kia Sorento: Body (Interior and Exterior)
Steering Angle Sensor
SpecificationsOccupant Detection system (ODS) Installation
1.
Install the ODS equipped seat cushion assembly. (Refer to the
Body group- Seat)
2.
Install the front passenger seat assembly.
( ...
Receiver-Drier Replacement
1.
Remove the condenser.
2.
Remove the cap (B) on the bottom of the condenser with a L wrench
(A).
Tight ...
Alternator Removal
1.
Disconnect the battery negative terminal.
2.
Disconnect the air compressor connector (A) and the alternator
connector (B), and remove th ...