Kia Sorento: Blower Resistor Replacement
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Heating,Ventilation And Air Conditioning / Blower / Blower Resistor Replacement
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the passenger side crash pad under cover (A).
|
| 3. |
Disconnect the connector and then remove the blower resistor (A)
after loosening the mounting screws.
|
| 4. |
Install in the reverse order of removal.
|
Blower Resistor Inspection
1.
Measure the resistance between the terminals.
2.
The measured resistance is not within specification, the blower
resistor must be replac ...
Power Mosfet (DATC) Inspection
1.
Measure the resistance between the terminals.
2.
If the measured resistance is not within specification, the blower
resistor must be rep ...
See also:
Crankshaft Disassembly
•
Use fender covers to avoid damaging painted surfaces.
•
...
Rear Washer Motor Inspection
1.
With the washer motor connected to the reservoir tank, fill the
reservoir tank with water.
...
Component Location
1. Rear glass defogger relay
2. Rear glass defogger switch
3. Rear glass defogger
...
Copyright © www.ksmanual.com 2014-2024