1. |
Remove the front driveshaft.
(Refer to Driveshaft Assembly - “Front Driveshaft”)
|
2. |
Remove the TJ joint assembly.
(Refer to Driveshaft Assembly - “TJ Joint”)
|
3. |
Remove the Dynamic damper.
(Refer to Driveshaft Assembly - “Dynamic Damper”)
|
4. |
Using a plier or flat-tipped (-) screwdriver, remove the BJ boot
bands (A).
|
5. |
Remove the BJ boot.
|
6. |
Install in the reverse order of removal.
|
Crankshaft Reassembly
1.
Install the main bearings.
Upper bearings have an oil groove of oil ho ...
Description
The immobilizer system will disable the vehicle unless the proper ignition
key is used, in addition to the currently available anti-theft systems such
as car alarms, the immobilizer system ai ...
Blind Spot Detection Switch Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad")
...