Kia Sorento: Auto Head lamp leveling Unit Removal
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Body Electrical System / Head lamp leveling Device / Auto Head lamp leveling Unit Removal
Height Sensor & Unit
| 1. |
Disconnect the negative(-) battery terminal.
|
| 2. |
Remove the height sensor connector (A).
|
| 3. |
Loosen the mounting bolts (2EA) from height sensor bracket after
removing the linkage (A).
|
| 4. |
Remove the height sensor.
|
Auto Head lamp leveling Unit Operation
Operating Procedure
1.
Suspension angle change resulted from vehicle's load change.
2.
Height sensor signal change
...
Auto Head lamp leveling Unit Installation
Height Sensor & Unit
1.
Install the height sensor.
2.
Connect the connector.
...
See also:
For best battery service
Keep the battery securely mounted.
Keep the battery top clean and dry.
Keep the terminals and connections clean, tight, and coated with petroleum
jelly or terminal grease.
Rinse any spill ...
Front Wheel Transfer Assembly Components Location
1. Under cover
2. Transaxle Assembly
3. Transfer assembly
4. Propeller shaft
5. Coupling assembly
1. Under cover
2. Transaxle Assembly
3 ...
Specification
Item
Specification
Coil Resistance (Ω)
19.0 ~ 22.0 [20°C(68°F)]
...
Copyright © www.ksmanual.com 2014-2024