Kia Sorento: Auto Defogging Sensor Inspection

To inspect and diagnose the sensor, refer to Self-Diagnosis procedure and DTC guide.

Auto Defogging Sensor Description

The auto defogging sensor is installed on the front window glass. The sensor judges and sends signal if moisture occurs to blow out wind for defogging. The air conditioner control module rece ...

Auto Defogging Sensor Replacement

1. Disconnect the negative (-) battery terminal. 2. Remove the auto defogging sensor cover (A). 3. Disconnect t ...

See also:

Inspection
1. Turn the ignition switch OFF. 2. Disconnect the VIS valve connector. 3. Measure resistance between VIS valve ...

Relay Box (Passenger Compartment) Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel (A). (Refer to Body - "Crash pad") ...

Purge Control Solenoid Valve (PCSV)
Purge Control Solenoid Valve (PCSV) is installed on the surge tank and controls the passage between the canister and the intake manifold. It is a solenoid valve and is open when the ECM groun ...