Kia Sorento: ATF Warmer Removal
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Automatic Transaxle System / Hydraulic System / ATF Warmer Removal
| 1. |
Drain the coolant.
(Refer to Engine Mechanical System - "Coolant")
|
| 2. |
Remove the air cleaner assembly and air duct.
(Refer to Engine Mechanical System - "Air cleaner")
|
| 3. |
Remove the battery and battery tray.
(Refer to Engine Electrical System - "Battery")
|
| 4. |
Remove the under cover.
(Refer to Engine Mechanical System - "Engine Room Under Cover")
|
| 5. |
Disconnect the coolant hose (B) after removing the coolant hose
clamp (A).
|
| 6. |
Disconnect the hose (B) after removing the automatic transaxle
fluid cooler hose clamp (A).
|
| 7. |
Remove the ATF Warmer (A).
|
ATF Warmer Component
1. ATF Warmar
2. Bypass valve
3. ATF hose & pipe
4. Coolant hose & pipe
...
ATF Warmer Installation
1.
Install in the reverse order of removal.
•
...
See also:
Relay Box (Passenger Compartment) Inspection
Fuse
1.
Be sure there is no play in the fuse holders, and that the fuses
are held securely.
2.
Are the fuse capacities for each circuit ...
Room Lamp Removal
[General]
1.
Disconnect the negative (-) battery terminal.
2.
Detach the lamp lens (A) from the room lamp with a flat-tip screwdriver
t ...
Copyright В© www.ksmanual.com 2014-2024