Kia Sorento: Ambient Temperature Sensor Replacement
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Heating,Ventilation And Air Conditioning / Air conditioning System / Ambient Temperature Sensor Replacement
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the front bumper.
(Refer to Body - "Front Bumper")
|
| 3. |
Disconnect the connector (B) and then remove the ambient temperature
sensor (A).
|
| 4. |
Install in the reverse order of removal.
|
Ambient Temperature Sensor Inspection
1.
Turn the ignition switch ON.
2.
Remove the front bumper.
(Refer to Body - "Front Bumper")
3.
...
Auto Defogging Sensor Description
The auto defogging sensor is installed on the front window glass. The
sensor judges and sends signal if moisture occurs to blow out wind for defogging.
The air conditioner control module rece ...
See also:
Fuel Pump Installation
1.
Install in the reverse order of removal.
Be careful of fuel pump direc ...
Timing Chain Cover Removal
•
Use fender covers to avoid damaging painted surfaces.
•
...
Cruise Control Switch Removal
1.
Disconnect the battery (-) terminal.
2.
Remove the air-bag module from the steering wheel. ( Refer to
RT group)
3.
...
Copyright © www.ksmanual.com 2014-2024