1. |
Install in the reverse order of removal.
|
2. |
Adjust the alternator belt tension after installation.
(Refer to Engine Mechanical System - "Drive Belt")
|
Propeller Shaft Removal and Installation
1.
After making a match mark on the flange yoke and transfer companion,
remove the propeller shaft mounting bolts (A).
Tightening torque:
...
Installation
1.
Install in the reverse order of removal.
If the oil seal on the trans ...
Rear Door Components
1. Door inside handle cap
2. Door trim
3. Door belt inner weatherstrip
4. Door module
5. Door panel
6. Door belt weatherstrip
7. Door body side weatherstrip
8. Door ...