[Rotor] |
1. |
Check that there is continuity between the slip rings (C).
|
2. |
Check that there is no continuity between the slip rings and the
rotor (B) or rotor shaft (A).
|
3. |
If the rotor fails either continuity check, replace the alternator.
|
[Stator] |
1. |
Check that there is continuity between each pair of leads (A).
|
2. |
Check that there is no continuity between each lead and the coil
core.
|
3. |
If the coil fails either continuity check, replace the alternator.
|
Rear Wiper Motor Inspection
Rear Wiper Motor
1.
Remove the 4P connector from the rear wiper motor.
2.
Connect battery positive (+) and negative (-) cables to terminals ...
Valve Clearance Inspection And Adjustment
Inspect and adjust the valve clearance when the engine is cold (Engine
coolant temperature : 20°C (68°F)) and cylinder ...
Steering Column and Shaft Inspection
1.
Check the steering column for damage and deformation.
2.
Check the joint bearing for damage and wear.
3.
Che ...