Kia Sorento: Air Ventilation Seat Removal
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Body Electrical System / Seat Electrical / Air Ventilation Seat Removal
| 1. |
Remove the seat back cover (A).
(Refer to Body - "Front seat")
|
| 2. |
Remove the blower fan (A) after removing the screws from the seat
back.
|
| 3. |
Remove the air duct (A) after disengaging the hook.
|
| 4. |
Remove the seat cushion (A).
(Refer to Body - "Front seat")
|
| 5. |
Remove the blower fan (A) after removing the screws and disengaging
hook.
|
| 6. |
Disconnect the connecter and remove the blower (A).
|
Air Ventilation Seat Description
Air ventilation seat
It blows the indoor air through the blower fan installed at the seat cushion
and back lower part, and supplies the air into the seat cushion and the seat
back through ...
Air Ventilation Seat Installation
1.
Install the blower fan.
2.
Install the seat back and cushion.
...
See also:
Relay Box (Passenger Compartment) Installation
1.
Install IPM(Intelligent intergrated Platform Module).
2.
Connect the IPM connector.
3.
Install the crash pad ...
Side Impact Sensor (SIS) Description
Side Impact Sensor (SIS) system consists of two Front-SIS which are installed
at each center of the front door module (LH and RH) and two Rear-SIS which are
installed at each rear pillar near ...
Circuit Diagram
...
Copyright В© www.ksmanual.com 2014-2024