• |
Transaxle assembly replacement
|
• |
TCM replacement
|
• |
TCM upgrading
|
1. |
Automatic Transaxle Fluid (ATF) temperature: 40 ~ 100°C (104 ~
212°F)
|
2. |
Static learning
Repeat the below shift pattern four times or more with stepping
on the brake.
|
3. |
Driving learning
Drive the vehicle from a stop in D through all gears 1st, 2nd,
3rd, 4th, 5th and 6th gear while holding the throttle steady at the
specified Throttle Position Sensor (TPS) value (15~25%).
|
On-vehicle Inspection
Inspect ignition coil assembly and
Perform spark test
1.
Check for DTCs.
...
Seat warmer (if equipped)
The seat warmer is provided to warm the front seats during cold weather.
With the ignition switch in the ON position, push either of the switches to warm
the driver's seat or the front passeng ...
Curtain Airbag (CAB) Module Installation
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable and wait for at least thirty
seconds.
...