1. |
Check DTC(s) and clear if exist.
|
2. |
Select "Data Treatment", to reset the ETC adaptive value.
|
3. |
Select "Resetting adaptive values".
|
4. |
Select "Reset", then wait 10 seconds after turning ignition key
off (Relay OFF).
|
5. |
Wait for 5 seconds after turning the ignition ON (ETC adaptive
value relearn).
If equipped with Button Engine Start System, push the engine start/stop
button 2 times without depressing the brake pedal. This will allow the
ECM to automatically learn the throttle valve position; then wait for
approximately 5 seconds.
|
6. |
Start engine.
|
7. |
Recheck DTC(s).
|
Changing tires
1.Park on a level surface and apply the parking brake firmly.
2.Place the transaxle shift lever in R (Reverse) with manual transaxle or P (Park)
with automatic transaxle.
3.Activate the hazard wa ...
Warning Lamp Activation
Warning Lamp Behavior after Ignition
On
As soon as the operating voltage is applied to the SRSCM ignition input,
the SRSCM activates the warning lamp for a bulb check.
The l ...
Roller Blind Motor Replacement
1.
Refer to the inspection procedure in the panorama sunroof motor.
(Refer to the "Panorama Sunroof Motor")
...