Kia Sorento: Adjustment - Horn - Body Electrical System - Kia Sorento XM 2011-2024 Service ManualKia Sorento: Adjustment

Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Body Electrical System / Horn / Adjustment

1.
Operate the horn, and adjust the tone to a suitable level by turning the adjusting screw.
  
Horn adjustment screw is automatically sealed with silicon sealant.
The shape and size of the applied sealant is variable and tails or dribbles are acceptable and not to be tampered with.

Inspection
Test the horn by connecting battery voltage to the 1 terminal and ground the 2 terminal. The horn should make a sound. If the horn fails to make a sound, replace it. Horn Relay Inspec ...

AVN System
...

See also:

Auto Defogging Actuator Replacement
1. Disconnect the negative (-) battery terminal. 2. Remove the cowl side trim. (Refer to Body - "Crash Pad") ...

Installation
1. Install the multifunction switch. 2. Install the clock spring and steering wheel. 3. Install the steering co ...

[CVVT System Mode]
(1) Low Speed / Low Load (2) Part Load (3) Low Speed / High Load (4) High Speed / High Load ...

Copyright В© www.ksmanual.com 2014-2024