Kia Sorento: Front Body A

Measurement Method

Projected Dimensions 1. These are the dimensions measured when the measurement points are projected into the reference plane, and are the reference dimensions ...

Front Body B

* These dimensions indicated in this figure are actual-measurement dimensions. [ Unit : mm (inch) ] ...

See also:

Rear combination lamp Removal
1. Disconnect the negative (-) battery terminal. [Outside] 2. Loose the screws (2EA) holding the rear combination lamp then disconn ...

Rear Driveshaft Removal and Installation
1. Remove the rear wheel and tire (A) from rear hub. Tightening torque: 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) ...

Room Lamp Installation
1. Install the room lamp assembly after connecting the lamp connector. 2. Install the lamp lens after assembling the bulb. ...