4WD only |
1. |
Remove the rear wheel and tire.
|
2. |
Remove the rear wheel speed sensor mounting bolt (A).
|
3. |
Remove the rear wheel guard.
|
4. |
Disconnect the rear wheel speed sensor connector (A).
|
5. |
Installation is the reverse of removal.
|
1. |
Remove the connector (A) after removing the front wheel speed
sensor clip.
|
2. |
Remove the rear wheel speed sensor.
(Refer to Driveshaft and Axle - "Rear Hub - Carrier")
|
3. |
Installation is the reverse of removal.
|
Auto Light Sensor Inspection
In the state of IGN1 ON, when multi function switch module detects auto
light switch on, tail lamp relay output and head lamp low relay output are controlled
according to auto light sensor ...
Measurement Method
Projected Dimensions
1.
These are the dimensions measured when the measurement points
are projected into the reference plane, and are the reference dimensions ...
Schematic Diagram
Canister
Canister is filled with charcoal and absorbs evaporated vapor in fuel
tank. The gathered fuel vapor in canister is drawn into the intake manifold
by the ECM/PCM when appropri ...