1. |
Turn ignition switch OFF and disconnect the negative (-) battery
cable.
|
2. |
Remove the crash pad lower panel.
(Refer to Body - "Crash pad lower panel")
|
3. |
Remove the junction box.
(Refer to Body Electrical System - "Relay Box(Passenger Compartment"))
|
4. |
Disconnect the parking brake switch connector.
|
5. |
Remove the parking brake cable mounting nuts (A).
|
6. |
Remove the parking brake pedal mounting bolts (A) and nut (B).
|
7. |
Remove the parking brake cable the fixing clip (A, B), and then
remove the parking brake pedal.
|
Removal
Replacing an on/off solenoid valve (SS-A, SS-B) does not require
additional hydraulic pressure adjustment; however, the ...
Circuit Diagram
...