The parking brake cables must not be bent or distorted. This will
lead to stiff operation and premature failure.
|
1. |
Remove the floor console assembly.
(Refer to Body - "Floor console")
|
2. |
Disconnect the connector (A) of parking brake switch.
|
3. |
Loosen the adjusting nut (A) and the parking brake cables (B).
|
4. |
Remove the parking brake lever assembly (A) after removing the
bolts.
|
IMS Control Switch Installation
Make sure that the IMS control switch connectors and related connectors
are plugged in properly.
Check the IMS c ...
Description
Evaporative Emission Control System prevents fuel vapor stored in fuel
tank from vaporizing into the atmosphere. When the fuel evaporates in the fuel
tank, the vapor passes through vent hoses ...
Catalytic Converter Installation
1.
Install in the reverse order of removal.
...