Kia Sorento: Parking Brake Assembly Removal
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Brake System / Parking Brake System / Parking Brake Assembly Removal
Parking Brake Shoe
| 1. |
Raise the vehicle, and make sure it is securely supported.
|
| 2. |
Remove the rear tire and wheel.
|
| 3. |
Remove the rear brake caliper and Rear disc brake.
(Refer to "Rear disc brake removal")
|
| 4. |
Remove the parking brake cable (B), after removing the fixing
clip (A).
|
| 5. |
Remove the hub assembly.
(Refer to Driveshaft and axle - "Rear hub - carrier")
|
| 6. |
Remove the adjuster assembly (B) and the lower return spring (A).
|
| 7. |
Remove the upper return spring (C) operating lever assembly (D).
|
| 8. |
Remove the shoe hold down pin (A) and the spring (B) by pressing
and rotating the spring.
|
| 9. |
Remove the brake shoes (C).
|
Components and Components Location
Components (1)
1. Parking brake pedal
2. Equalizer assembly
3. Parking brake cable
Components (2)
1. Parking brake pedal assembly
2. Front parking brak ...
Parking Brake Assembly Installation
Parking Brake Shoe
1.
Install the shoe hold down pin (A) and spring (B) by pressing
and rotating the spring.
2.
Install the ope ...
See also:
Emergency Fastening Device (EFD) Removal
1.
Disconnect the battery negative cable, and wait for at least thirty
seconds before beginning work.
2.
Remove the EFD cover pad (A).
...
Troubleshooting
Problem Symptoms Table
Use the table below to help you find the cause of the problem. The numbers
indicate the priority of the like cause of the problem. Check each part in order.
...
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the HO2S connector.
3.
Measure resistance between the HO2S termi ...
Copyright В© www.ksmanual.com 2014-2024