1. |
Remove the rear wheel & tire.
|
2. |
Loosen the guide rod bolt (B) and pivot the caliper (A) up out
of the way.
|
3. |
Replace pad shim (D), pad retainers (C) and brake pads (B) in
the caliper carrier (A).
|
4. |
Compress the piston into the caliper body using the SST (09581-11000).
|
5. |
Place the caliper body (A) on the caliper carrier and tighten
the guide rod bolt (B).
|
6. |
Install the rear wheel & tire.
|
Auto Head lamp leveling Unit Installation
Height Sensor & Unit
1.
Install the height sensor.
2.
Connect the connector.
...
Power Mosfet (DATC) Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the passenger side crash pad under cover (A).
3.
...
Rear Wheel Speed Sensor Components
1. Rear wheel speed sensor
2. Rear wheel speed sensor cable
...