Kia Sorento: Brake Pedal Adjustment
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Brake System / Brake System / Brake Pedal Adjustment
| Brake Pedal Height and Free Play |
| 1. |
Disconnect the stop lamp switch connector (A) and loosen the stop
lamp switch lock nut.
|
| 2. |
Adjust the brake pedal height (A) as illustration below.
|
| 3. |
Adjust the stop lamp switch clearance (B) and brake pedal free
play.
|
| 4. |
Connect the stop lamp switch connector.
|
Brake Pedal Installation
1.
Pre-tighten the bracket fixing bolt (A) in dash panel.
2.
Install the brake booster and brake pedal member fixing nuts (A)
secur ...
Front Disc Brake Components
1. Guide rod bolt
2. Bleed screw
3. Caliper carrier
4. Caliper body
5. Inner pad shim
6. Brake pad
7. Pad retainer
...
See also:
Control System Composition
...
4WD ECU Removal
1.
Prior to replacing the 4WD ECU, check the 4WD ECU's clutch learing
with the GDS tool.
(Refer to 4WD Control System - "Repair procedures")
...
Description
Crankshaft Position Sensor (CKPS) detects the crankshaft position and
is one of the most important sensors of the engine control system. If there
is no CKPS signal input, the engine may stop ...
Copyright В© www.ksmanual.com 2014-2024