1. |
Installation is the reverse of removal.
|
2. |
After installation, bleed the brake system.
(Refer to Brake system - "Brake system Bleeding")
|
3. |
Check the spilled brake oil.
|
Component Location
1. Start relay #2 (W/O immo./smart key) /
ACC relay (With smart key)
2. Start relay #1
3. Windshield deicer relay
4. Power outlet relay
5. Wiper relay (low)
6. Burgla ...
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the OCV connector.
3.
Measure resistance between the OCV termina ...
Front Strut Assembly Removel
1.
Remove the front wheel and tire (A) from front hub .
Tightening torque:
88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)
...