Kia Sorento: Master Cylinder Installation
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Brake System / Brake System / Master Cylinder Installation
| 1. |
Installation is the reverse of removal.
|
| 2. |
After installation, bleed the brake system.
(Refer to Brake system - "Brake system Bleeding")
|
Master Cylinder Removal
1.
Turm ignition switch OFF and disconnect the negative (-) battery
cable.
2.
Remove the air cleaner assembly.
G 2.4 GDI (Refer to ...
See also:
Compressor Installation
1.
Make sure the compressor mounting bolt with the correct length
is screwed in. Tighten the mounting bolts with the specified tightening
order.
...
Climate Control Air Filter Replacement
1.
Disconnect the stopper (B) from the glove box (A).
2.
Disconnect the air damper (A) from the glove box (B).
...
Muffler Removal and Installation
1.
Remove the front muffler (A) after loosening the mounting nuts.
Tightening torque:
39.2 ~ 58.8 N.m (4.0 ~ 6.0 kgf.m, 28.9 ~ 43.4 lb-ft ...
Copyright В© www.ksmanual.com 2014-2024