1. |
Turm ignition switch OFF and disconnect the negative (-) battery
cable.
|
2. |
Remove the air cleaner assembly.
G 2.4 GDI (Refer to Engine Mechanical System - "Air clecner")
G 3.3 GDI (Refer to Engine Mechanical System - "Air clecner")
|
3. |
Disconnect the brake fluid level switch connector (B), and remove
the reservoir cap.
|
4. |
Remove the brake fluid from the master cylinder reservoir with
a syringe.
|
5. |
Disconnect the brake tube (A) from the master cylinder by loosening
the tube flare nut.
|
6. |
Remove the master cylinder (B) from the brake booster after loosening
the mounting nuts (A).
|
ESC Control Module Installation
1.
Installation is the reverse of removal.
2.
Tighten the HECU mounting bolts and nuts to the specified torque.
3.
...
Hill-start assist control (HAC)
A vehicle has the tendency to roll back on a steep hill when it starts to go
after stopping. The Hill-start Assist Control (HAC) prevents the vehicle from rolling
back by applying the brakes automat ...
System Block Diagram
Component Parts And Function Outline
Component part
Function
Vehicle-speed sensor
Converts vehicle speed to pulse.
ECM
Receives signals fr ...