Kia Sorento: Brake Booster Removal
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Brake System / Brake System / Brake Booster Removal
| 1. |
Turn ignition switch OFF and disconnect the negative (-) battery
cable.
|
| 2. |
Remove the air cleaner assembly.
G 2.4 GDI (Refer to Engine Mechanical System - "Air Cleaner")
G 3.3 GDI (Refer to Engine Mechanical System - "Air Cleaner")
|
| 3. |
Remove the master cylinder.
(Refer to Brake system - "Master cylinder")
|
| 4. |
Disconnect the vacuum hose (A) from the brake booster.
|
| 5. |
Remove the snap pin (A) and clevis pin (B).
|
| 6. |
Remove the mounting nuts (A).
|
| 7. |
Remove the brake booster (A).
|
Brake Booster Brake Booster Operating Test
For simple checking of the brake booster operation, carry out the following
tests.
1.
Run the engine for one or two minutes, and then stop it. If the
pedal depresses ...
Brake Booster Inspection
1.
Inspect the check valve in the vacuum hose, intensifier and the
connecting section.
...
See also:
Description
Limitations Of The Navigation system
GPS Signal Reception State
As the GPS satellite frequency is received/transmitted in straight lines,
reception may not work if hiding devices are pla ...
Radiator Removal and Installation
1.
Disconnect the battery terminals.
2.
Remove the air cleaner assembly.
(Refer to Intake And Exhaust System - "Air Cleaner" ...
Copyright В© www.ksmanual.com 2014-2024