1. |
Remove the ignition key from the vehicle.
|
2. |
Disconnect the negative (-) cable from battery and wait for at
least thirty seconds.
|
3. |
Install the EFD with a bolt (B).
|
4. |
Connect the EFD connector (A).
|
5. |
Install the center pillar trim. (Refer to the Body group- Interior
trim)
|
6. |
Install the door scuff trim. (Refer to the Body group- Interior
trim)
|
7. |
Insert the seat belt to the anchor pretensioner.
|
8. |
Attaches EFD cover pad (A) on EFD.
|
9. |
Reconnect the battery negative cable.
|
10. |
After installing the EFD, confirm proper system operation:
|
Side Impact Sensor (SIS) Removal
Front Side Impact Sensor
•
Removal of the airbag must be performed according to ...
Transaxle Oil Temperature Sensor Description
Transaxle Oil Temperature Sensor(OTS) monitors the automatic transaxle
fluid's temperature and conveys the readings to TCM. It is an Negativen Thermal
Coefficient(NTC) sensor whose resist ...
Anti-Pinch Strip Installation
1.
Install the tailgate anti-pinch strip.
2.
Install the tailgate side trim.
3.
Connect the negative (-) batter ...