1. |
Remove the ignition key from the vehicle.
|
2. |
Disconnect the battery negative cable and wait for at least thirty
seconds.
|
3. |
Connect the seat belt pretensioner connector.
|
4. |
Install the seat belt pretensioner with bolts (A, B).
|
5. |
Install the seat belt upper mounting bolt.
|
6. |
Install the center pillar trim. (Refer to the Body group- Interior
trim)
|
7. |
Install the door scuff trim. (Refer to the Body group- Interior
trim)
|
8. |
Insert the seat belt to the emergency fastening device.
|
9. |
Attaches emergency fastening device cover pad (A) on emergency
fastening device.
|
10. |
Reconnect the battery negative cable.
|
11. |
After installing the seat belt pretensioner, confirm proper system
operation:
|
Front Body C
* These dimensions indicated in this figure are actual-measurement
dimensions. [ Unit : mm (inch) ]
...
Component Location
[Engine Room]
1. Receiver-drier
2. Condenser
3. Ambient temperature Sensor
4. Compressor
5. Discharge Hose
6. Suction & Liquid Tube Assembly
7. Servic ...
Cooling Fan Removal and Installation
Cooling Fan Assembly
1.
Disconnect the battery terminals.
2.
Remove the air cleaner assembly.
(Refer to Intake And Exhaust ...