1. |
Disconnect the battery negative cable, and wait for at least thirty
seconds before beginning work.
|
2. |
Remove the emergency fastening device cover pad (A). [Driver only]
|
3. |
Remove the seat belt after pushing the lock pin with a fiat-tip
screwdriver (B).
|
4. |
Remove the door scuff trim. (Refer to the Body group- Interior
trim)
|
5. |
Remove the center pillar trim. (Refer to the Body group- Interior
trim)
|
6. |
Remove the seat belt upper mounting bolt.
|
7. |
Loosen the seat belt pretensioner mounting bolt (A, B) and remove
the seat belt pretensioner.
|
8. |
Disconnect the seat belt pretensioner connector.
|
Front Wiper Motor Inspection
Speed Operation Check
1.
Remove the connector (A) from the wiper motor.
2.
Attach the positive (+) lead from the battery to terminal ...
Front Wiper Motor Component Location
1. Cap
2. Nut
3. Wiper arm & blade
4. Retainer
5. Cowl top cover
6. Bolt
7. Wiper motor & linkage assembly
8. Wiper motor connector
...
Tilt and telescopic steering
Tilt and telescopic steering allows you to adjust the steering wheel before you
drive.You can also raise it to give your legs more room when you exit and enter
the vehicle.
The steering wheel shoul ...