1. |
Remove the ignition key from the vehicle.
|
2. |
Disconnect the battery negative cable and wait for at least thirty
seconds.
|
3. |
Tighten the curtain airbag mounting bolts.
|
4. |
Connect the curtain airbag connector.
|
5. |
Install the roof trim. (Refer to the Body group- Interior)
|
6. |
Reconnect the battery negative cable.
|
7. |
After installing the curtain airbag (CAB), confirm proper system
operation:
|
Fault Diagnosis
Features a fail-safe mechanism that provides "limp-home" 4th gear hold
to enable the vehicle to be driven to the owner's home or dealer shop.
Fail-Safe: The TCM provides 4th ge ...
Audio Remote Control Installation
1.
Install the audio remote control switch on the steering wheel
front cover.
2.
Install the steering wheel front cover.
...
Side Airbag (SAB) Module Installation
Be sure to install the harness wires not to be pinched or interfered
with other parts.
...