Be sure to install the harness wires not to be pinched or interfered
with other parts.
|
|
1. |
Remove the ignition key from the vehicle.
|
2. |
Disconnect the battery negative cable and wait for at least thirty
seconds.
|
3. |
Install the new seat back assembly. (Refer to the Body group-
Seat)
|
4. |
Install the front seat assembly. (Refer to the Body group- Seat)
|
5. |
Recline and slide the front seat forward fully, make sure the
harness wires are not pinched of interfering with other parts.
|
6. |
Reconnect the battery negative cable.
|
7. |
After installing the side airbag (SAB), confirm proper system
operation:
|
Components
1. HECU module
2. Front wheel speed sensor
3. Rear wheel speed sensor
4. Yaw rate & Lateral G sensor
5. ABS Warning lamp
6. Parking brake/EBD warning lamp
7. ESC F ...
External Amplifier Components
Connector Pin Information
No.
Connector A (26 pin)
Connector B (16 pin)
Connector C (12 pin)
1
Battery +
Right surround speaker +
...
AC Inverter Unit Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the right luggage side trim.
(Refer to Body - "Luggage Side Trim")
...