Kia Sorento: Driver Airbag (DAB) Module and Clock Spring Inspection
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Restraint / Airbag Module / Driver Airbag (DAB) Module and Clock Spring Inspection
| Driver Airbag (DAB) |
If any improper parts are found during the following inspection, replace
the airbag module with a new one.
Never attempt to measure the circuit resistance of the airbag
module (squib) even if you are using the specified tester. If the circuit
resistance is measured with a tester, accidental airbag deployment will
result in serious personal injury.
|
| 1. |
Check pad cover for dents, cracks or deformities.
|
| 2. |
Check the airbag module for denting, cracking or deformation.
|
| 3. |
Check hooks and connectors for damage, terminals for deformities,
and harness for binds.
|
| 4. |
Check airbag inflator case for dents, cracks or deformities.
|
| 5. |
Install the airbag module to the steering wheel to check for fit
or alignment with the wheel.
|
Clock Spring
| 1. |
If, as a result of the following checks, even one abnormal point
is discovered, replace the clock spring with a new one.
|
| 2. |
Check connectors and protective tube for damage, and terminals
for deformities.
|
Driver Airbag (DAB) Module and Clock Spring Removal
1.
Set the front tires straight-ahead before removing the steering
wheel.
...
Driver Airbag (DAB) Module and Clock Spring Installation
1.
Set the front tires straight-ahead before assembling the steering
wheel.
...
See also:
Shift Lever Removal
1.
Remove the floor console.
(Refer to Body - "Floor console")
2.
Remove the air duct.
3.
Dis ...
Tightening Torque
Items
N.m
Kgf.m
lb-ft
Front and rear doors
Door hinge to body
33.3~41.2
3.4~4.2
24.6~30.4
Door hinge to door
21 ...
Crankshaft Reassembly
1.
Install the main bearings.
Upper bearings have an oil groove of oil ho ...
Copyright В© www.ksmanual.com 2014-2024