1. |
Set the front tires straight-ahead before removing the steering
wheel.
|
2. |
Disconnect the battery negative cable.
|
3. |
Release the connector locking pin, then disconnect the driver
airbag module connector(B).
|
4. |
Remove the steering wheel and steering wheel column shroud. (Refer
to the Steering System group- Steering Column and Shaft)
|
5. |
Disconnect the clock spring and horn connector, then remove the
clock spring.
|
Master Cylinder Installation
1.
Installation is the reverse of removal.
2.
After installation, bleed the brake system.
(Refer to Brake system - "Brake system B ...
Direct Electro Hydraulic Actuator Coupling Installation
1.
Install in the reverse order of removal.
•
...
Cylinder Head Disassembly
Identify MLA(Mechanical Lash Adjuster), valves, valve springs as they
are removed so that each item can be reinstalled i ...