Before doing any SRS repairs, use the GDS Pro to check for DTCs.
Refer to the Diagnostic Trouble Code list for repairing of the related
DTCs.
|
- |
SRSCM
|
- |
Deployed airbag(s)
|
- |
Seat belt pretensioner(s)
|
- |
Driver anchor pretensioner
|
- |
Front impact sensors
|
- |
SRS wiring harnesses
|
- |
Inspect the clock spring for heat damage.
If any damage found, replace the clock spring.
|
- |
SRSCM
|
- |
Deployed airbag(s)
|
- |
Side impact sensor(s) for the crash side(s)
|
- |
SRS wiring harnesses
|
- |
Seat belt pretensioner (s)
|
- |
Driver anchor pretensioner (only rollover crash event)
|
- |
Turn the ignition switch ON; the SRS indicator should come on
for about six seconds and then go off.
|
Parking Assist Sensor Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the rear bumper cover.
(Refer to Body - "Rear Bumper Cover")
...
Components
1. Camshaft bearing cap
2. Camshaft front bearing cap
3. Exhaust camshaft
4. Intake camshaft
5. Exhaust CVVT assembly
6. Intake CVVT assembly
7. Exhaust camshaft upper ...
Antenna Installation
1.
Connect the roof antenna cables and connectors.
2.
Install the rear roof trim.
...