Kia Sorento: Steering Column and Shaft Inspection
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Steering System / Electric Power Steering / Steering Column and Shaft Inspection
| 1. |
Check the steering column for damage and deformation.
|
| 2. |
Check the joint bearing for damage and wear.
|
| 3. |
Check the tilt bracket for damage and cracks.
|
| 4. |
Check the key lock assembly for proper operation and replace it
if necessary.
|
Steering Column and Shaft Disassembly
Universal joint assembly
1.
Loosen the bolt (A) and then disconnect the universal joint assembly
from the steering column assembly.
Tightenin ...
Steering Gear box Removal
1.
Remove the front wheel and tire (A) from front hub.
Tightening torque :
88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)
...
See also:
Multimedia Jack Installation
1.
Install the Multimedia jack.
2.
Install the console upper cover.
...
3. TCM Terminal input/ output signal
Connector [A]
Pin No.
Signal
Condition
Type
Level
29
Sports mode up switch
Up ON
Input
0V/Battery voltage level
...
IPM Description
IPM (Intelligent intergrated Platform Module) receives various
input switch signals ling time and alarm fuctions for fr washer interlocking
wiper, fr intermittent wiper, mist wiper, rea ...
Copyright В© www.ksmanual.com 2014-2024