1. |
Loosen the bolt (A) and then disconnect the universal joint assembly
from the steering column assembly.
|
2. |
Reassembly is the reverse of the disassembly.
|
1. |
Make a groove on the head of special bolts (A) by a punch.
|
2. |
Loosen the special bolt using a screw driver and then remove the
key lock assembly from the steering column assembly.
|
3. |
Reassembly is the reverse of the disassembly.
|
Interior D
* These dimensions indicated in this figure are actual-measurement
dimensions. [ Unit : mm (inch) ]
Front pillar ...
CVVT (Continuously Variable Valve Timing) System Operation Principle
The CVVT has the mechanism rotating the rotor vane with hydraulic force
generated by the engine oil supplied to the advance or retard chamber in accordance
with the CVVT oil control valve con ...
Front wheel alignment
When using a commercially available computerized wheel alignment
equipment to inspect the front wheel alignment, always ...