1. |
Disconnect the battery negative cable from the battery and then
wait for at least 30 seconds.
|
2. |
Turn the steering wheel so that the front wheels can face straight
ahead.
|
3. |
Remove the airbag module. (Refer to Restraint - "Driver Airbag
(DAB) Module and Clock Spring")
|
4. |
Disconnect the connector & lock nut (A) and then remove the steering
wheel by using special service tools (09561-11001).
|
5. |
Installation is the reverse of the removal.Removal
|
Alternator Disassembly
1.
Remove the alternator cover (A) using a screw driver after loosening
the nuts (B).
2.
Remove the slip ring guide (A) and then lo ...
Flex Steering Components Location
1. Flex steering switch
...
Cylinder Block Reassembly
1.
Install the oil jet (A).
Tightening torque :
24.5 ~ 29.4 N.m (2.5 ~ 3.0 kgf.m, 18.1 ~ 21.7 lb-ft)
...