Kia Sorento: Specifications
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Steering System / Specifications
| Item |
Specification |
|
| Type |
Motor Driven Power Steering |
|
| Hydraulic Power Steering System |
||
| Steering gear |
Type |
Rack & Pinion |
| Rack stroke |
160mm |
|
| Steering angle(Max.) |
Inner |
39.06°±1°30’ |
| Outer |
31.9° |
|
Tightening Torques
| Item |
Tightening torque (kgf.m) |
||
| Nm |
kgf.m |
lb-ft |
|
| Tire wheel hub nuts |
88.3 ~ 107.9 |
9.0 ~ 11.0 |
65.1 ~ 79.6 |
| Steering wheel lock nut |
39.2 ~ 49.0 |
4.0 ~ 5.0 |
28.9 ~ 36.2 |
| Steering column assembly to Universal joint |
49.0 ~ 58.8 |
5.0 ~ 6.0 |
36.2 ~ 43.4 |
| Steering column mounting bolts |
44.1 ~ 49.0 |
4.5 ~ 5.0 |
32.5 ~ 36.2 |
| Steering column mounting nuts |
12.7 ~ 17.7 |
1.3 ~ 1.8 |
9.4 ~ 13.0 |
| Universal joint to pinion of steering gear |
32.4 ~ 37.3 |
3.3 ~ 3.8 |
23.9 ~ 27.5 |
| Tie rod end castle nut |
23.5 ~ 33.3 |
2.4 ~ 3.4 |
17.4 ~ 24.6 |
| Steering gear box to sub freame |
88.3 ~ 107.9 |
9.0 ~ 11.0 |
65.1 ~ 79.6 |
| Stabilizer link nut |
98.1 ~ 117.7 |
10.0 ~ 12.0 |
72.3 ~ 86.8 |
| Roll rod mounting bolt & nut |
107.9 ~ 127.5 |
11.0 ~13.0 |
79.6 ~ 94.0 |
| Lower arm to knuckle |
98.1 ~ 117.7 |
10.0 ~12.0 |
72.3 ~ 86.8 |
| Sub frame mounting bolts |
(A) 44.1 ~ 58.8 |
4.5 ~ 6.0 |
32.5 ~ 43.4 |
| (B) 156.9 ~ 176.5 |
16.0 ~ 18.0 |
115.7 ~ 130.2 |
|
| Upper roll rod bracket bolt |
(A) 107.9 ~ 127.5 |
11.0 ~ 13.0 |
79.6 ~ 94.0 |
| (B) 49.0 ~ 63.7 |
5.0 ~ 6.5 |
36.2 ~ 47.0 |
|
Steering System
...
Special Service Tools
Tool (Number and Name)
IIIustration
Use
09561-11001
Steering wheel puller
Remove the steering wheel
...
See also:
Component Location
1. Cluster assembly
2. Seat belt switch
3. Vehicle speed sensor
4. Engine coolant temperature sender
5. Oil pressure switch
6. Brake fluid level warning switch
7. Parking ...
Blade inspection
✽ NOTICE
Commercial hot waxes applied by automatic vehicle washes have been known to
make the windshield difficult to clean.
Contamination of either the windshield or the wiper blades with ...
Water Temperature Control Assembly Removal
1.
Disconnect the battery negative terminal.
2.
Loosen the drain plug and drain the engine coolant.
3.
Remove ...
Copyright © www.ksmanual.com 2014-2024