Kia Sorento: TPMS Receiver Operation
|
1. |
General Function
| A. |
Auto learn takes place only once per Ignition cycle.
|
| B. |
On successful completion.
|
| C. |
Until Auto-learn completes, previously learned sensors
(together with their respective locations) are monitored for
under inflation / leak warnings.
|
| D. |
Spare tire inflation / DTC state is not displayed.
|
|
|
2. |
General Conditions to Learn New Sensors:
| A. |
Auto learning only functions when speed is more than 25
kph (approx. 15 mph).
|
| B. |
Receiver must determine that it is confident that sensor
is not temporary:
|
| 2) |
Uses confidence reduction of previously learned
sensors.
|
|
| C. |
Typical time at driving over 25 kph to learn a new sensor
is up to 10 minutes.
|
|
|
3. |
General Conditions to Un-Learn a sensor that is removed:
| A. |
It takes less than 10 minutes at 20~30kph.
|
| B. |
Confidence reduction is dependant on vehicle speed and
the number of sensors known to the receiver.
|
|
1.
Mode
(1)
Virgin State
A.
The receiver as a sole part is shipped in this
state. ...
When the receiver first arrives for replacement:
1)
It will be in Virgin State.
...
See also:
Transaxle Oil Temperature Sensor Removal
1.
Remove the battery and the battery tray.
(Refer to Engine Electrical System - "Battery")
2.
Remove the under cover.
...
Interior B
* These dimensions indicated in this figure are actual-measurement
dimensions. [ Unit : mm (inch) ]
...
Output Speed Sensor Specifications
▷ Type: Hall effect sensor
Operation condition (°C)°F
((-)40 ~ 150)) -40 ~ 302
Air gap(mm)in.
(1.45~1.9) 0.0571~0.0748
Output voltage (V ...
TPMS Receiver Description
TPMS Receiver Replacement