Kia Sorento: TPMS Receiver Description
1. |
Mode
(1) |
Virgin State
A. |
The receiver as a sole part is shipped in this
state. Replacement parts should therefore arrive in
this state.
|
B. |
In this state, there is no Auto-Location, no sensor
wake-up, no sensor monitoring and no DTC monitoring.
|
C. |
The state indicates that platform specific parameters
must be written to the receiver and that sensors are
un-learned.
|
|
(2) |
Normal State
A. |
In order for tire inflation state and DTC monitoring
to occur, the receiver must be in this state.
|
B. |
In this state, automatic sensor learning is enabled.
|
|
|
2. |
Overview
A. |
Auto-Learns new sensors.
|
B. |
Receives RF data from sensor.
|
C. |
Uses sensor data to decide whether to turn on TREAD Lamp.
|
D. |
Uses sensor information, distance traveled, background
noise levels, Auto-learn status, short circuit output status,
vehicle battery level, internal receiver states to determine
if there is a system or a vehicle fault.
|
|
Sensor Fit
•
Handle the sensor with care.
•
...
1.
General Function
A.
Auto learn takes place only once per Ignition cycle.
B.
On successful compl ...
See also:
Description
Intake Air Temperature Sensor (IATS) is included inside Manifold Absolute
Pressure Sensor and detects the intake air temperature.
To calculate precise air quantity, correction of the air tem ...
Cooling Fan Description
Control the cooling motor voltage in according to the duty(300Hz) of ECM.
[ECU → PWM Input Signal(SI : 300Hz)]
Signal Input Duty (%)
Motor Voltage (V)
10
...
Power Window Switch Inspection
Main Power Window Switch Inspection
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front door trim and power window switch.
...