1. |
Measure the tread depth of the tires.
|
2. |
If the remaining tread depth (A) is less than the limit, replace
the tire.
|
Checking For Pull And Wander |
1. |
Rotate the front right and front left tires, and perform a road
test in order to confirm vehicle stability.
|
2. |
If the steering pulls to the opposite side, rotate the front and
rear tires, and perform a road test again.
|
3. |
If the steering continues to pull to one side, rotate the front
right and left tires again, and perform a road test.
|
4. |
If the steering continues to pull to the opposite side, replace
the front wheels with new ones.
|
Specifications
Items
Specifications
Rated voltage
5V
Load
Max. 1mA
Detection illuminations
Tail lamp
ON : 2.7 ± 0.05 (V)
OFF : 4.3 ...
Description
Intake Air Temperature Sensor (IATS) is included inside Manifold Absolute
Pressure Sensor and detects the intake air temperature.
To calculate precise air quantity, correction of the air tem ...
IPM Function
1.
Wiper & Washer Control
(1)
Front Washer Interlocking Wiper Control
If washer switch (WasherSW) is ON at the status of IG ...