1. |
Remove the rear wheel and tire (A) from rear hub .
|
2. |
In the case of 4WD vehicle, remove the rear differential assembly.
(Refer to Driveshaft and axle - "Rear Differential Carrier")
|
3. |
Loosen the nut (A-1ea) and then remove the rear stabilizer link
(B).
[2WD]
[4WD]
|
4. |
Loosen the bolt and then remove the rear stabilizer bar (A) with
the sub frame.
[2WD]
[4WD]
|
5. |
Installation is the reverse of removal.
|
Electric power steering (EPS)
The power steering uses a motor to assist you in steering the vehicle. If the
engine is off or if the power steering system becomes inoperative, the vehicle may
still be steered, but it will require ...
Record your key number
The key code number is stamped on the bar code tag attached
to the key set. Should you lose your keys,
this number will enable an authorized Kia dealer to duplicate the keys easily.
Remove the ba ...
Tire pressure monitoring system TPMS
(1) Low tire pressure telltale / TPMS malfunction indicator
Each tire, including the spare (if provided), should be checked monthly when
cold and inflated to the inflation pressure recommended by ...