1. |
Remove the rear wheel & tire.
|
2. |
Loosen the nuts & bolts and then remove the trailing arm (A) with
the rear axle.
[2WD]
[4WD]
|
3. |
Loosen the parking brake cable bracket bolt (A) & height sensor
bracket bolt (B).
[2WD]
[4WD]
|
4. |
Loosen the mounting bolt and then remove the trailing arm (A)
with the frame.
|
5. |
Installation is the reverse of removal.
|
Front Door Replacement
Front Door Trim Replacement
•
When prying with a flat-tipped screwdriver, wrap it with
...
Inspection (With GDS)
1.
Check IPM input/output specification of multifunction switch using
the GDS. If the specification is abnormal, replace the lamp or wiper
switch.
...
Cylinder Block Inspection
1.
Remove gasket material.
Using a gasket scraper, remove all the gasket material from the top
surface of the cylinder block.
2.
Cl ...